Browsing by Author "Başaran H."

Now showing 1 - 4 of 4
  • No Thumbnail Available
    Item
    Effects of fiber reinforced plaster on the earthquake behavior of masonry buildings
    (Shiraz University, 2015) Başaran H.; Demir A.; Baǧci M.; Ercan E.
    In this paper the traditional covering plaster of masonry buildings is supplied with Polypropylene and steel fiber to enhance their seismic behavior. The plaster mix proportion is determined by some initial mortar tests. Also, one story, single span masonry building specimen plastered with different mortars is tested on a shaking table 8 times under a seismic input and the performance of the specimens with the above types of mortar is evaluated. The specimen plastered with a traditional plaster was regarded as control and its earthquake behavior was compared to that reinforced by fiber plaster. Steel fiber or polypropylene addition significantly increased stiffness, displacement ability and energy consumption ability of specimens as compared to control. The suggested reinforcement method was proven to strengthen masonry buildings in a fast, reliable and economical way. Moreover, it can easily be adapted to any masonry building without causing any negative impact. The suggested method is fire and corrosion resistant. © Shiraz University.
  • No Thumbnail Available
    Item
    Experimental and numerical investigation of walls strengthened with fiber plaster
    (Techno-Press, 2015) Başaran H.; Demir A.; Baʇci M.; Ergun S.
    The topic of this study is to investigate behaviors of masonry walls strengthened with reinforced fiber plaster under diagonal tensile loads. Full blend brick 100×50×30 mm in dimensions were used to make masonry walls with dimensions of 400×400×100 mm. Three different samples were manufactured by plastering masonry walls with traditional style, with 3% polypropylene or with 5% steel fiber. All the samples were tested using ASTM 1391- 81 standards. The propagation of damage on samples caused by diagonal tensile load was observed and load-displacement graphs were plotted for each sample. A finite element software (ABAQUS) was used to obtain numerical values for all samples and crack patterns and load-displacement responses were obtained. Experimental and numerical results were compared. Copyright © 2015 Techno-Press, Ltd.
  • No Thumbnail Available
    Item
    Influence of stirrup spacing in concrete column on its dynamic characteristics; [Utjecaj razmaka spona u betonskom stupu na njegova dinamička svojstva]
    (Union of Croatian Civil Engineers and Technicians, 2015) Başaran H.
    Changes in natural frequencies, modal shapes, and damping ratios of a two story single span reinforced concrete building having different stirrup spacing in columns are analysed in the paper. Two building models measuring 150 × 150 × 135 cm were manufactured for the testing. Dynamic properties of both buildings were experimentally determined using the operational modal analysis. The ABAQUS finite element software was used to numerically determine dynamic properties of the buildings. The effect of stirrup densification in columns on dynamic properties of the building was defined by comparing experimental and numerical analysis results.
  • No Thumbnail Available
    Item
    Investigation of seismic safety of a masonry minaret using its dynamic characteristics
    (Techno Press, 2016) Başaran H.; Demir A.; Ercan E.; Nohutçu H.; Hökelekli E.; Kozanoğlu C.
    Besides their spiritual significance, minarets are humanity's cultural heritage to the future generations due to their historical and architectural attraction. Currently, many historical masonry minarets are damaged and destroyed due to several reasons such as earthquakes and wind. Therefore, safety of these religiously significant buildings needs to be thoroughly investigated. The utmost care must be taken into account while investigating these structures. Our study investigated earthquake behavior of historical masonry minaret of Haci Mahmut Mosque. Destructive and non-destructive tests were carried out to determine earthquake safety of this structure. Brick-stone masonry material properties of structure were determined by accomplishing ultrasonic wave velocity, Schmidt Hammer, uniaxial compression (UAC) and indirect tension (Brazilian) tests. Determined material properties were used in the finite element analysis of the structure. To validate the numerical analysis, Operational Modal Analysis was applied to the structure and dynamic characteristics of the structure were determined. To this end, accelerometers were placed on the structure and vibrations due to environmental effects were followed. Finite element model of the minaret was updated using dynamic characteristics of the structure and the realistic numerical model of the structure was obtained. This numerical model was solved by using earthquake records of Turkey with time history analysis (THA) and the realistic earthquake behavior of the structure was introduced. © 2016 Techno-Press, Ltd.