Browsing by Author "Coban M.B."
Now showing 1 - 15 of 15
Results Per Page
Sort Options
Item Synthesis and photoluminescence characteristics of a novel Eu and Tb doped Li2MoO4 phosphor(Elsevier Ltd, 2021) Souadi G.; Kaynar U.H.; Ayvacikli M.; Coban M.B.; Oglakci M.; Canimoglu A.; Can N.Li2MoO4:x Eu3+ and Li2MoO4:xTb3+ phosphors, where x = 0.5, 1, 2, 3, 5 and 7 wt%, were synthesized through a gel-combustion method. The XRD data reveals that Eu3+ and Tb3+ doped Li2MoO4 phosphors exhibit a Rhombohedral structure belonging to the space group R3 which matched well with the standard JCPDS files (No.012-0763). We present photoluminescence (PL) spectra from Eu and Tb doped Li2MoO4 under 349 nm Nd:YLF pulses laser excitation over the temperature range of 10–300 K. Undoped Li2MoO4 shows a wide broad band around 600 nm because of the intrinsic PL emission of tetrahedral of MoO42− which was in good agreement with previous findings. Under the excitation of 394 nm, the as-synthesized phosphors exhibited sharp and strong intensity PL emission signals in the red (612 nm, 5D0→7F2 transition) and green (544 nm, 5D4→7F5 transition), respectively. The critical doping concentration of Eu3+ and Tb3+ ions in the Li2MoO4 were estimated to be 2 wt%. The concentration quenching phenomena were discussed, and the critical distances for energy transfer have also been evaluated by the concentration quenching. © 2021 Elsevier LtdItem Structural and temperature-dependent luminescence of Terbium doped YAl3(BO3)4 phosphor synthesized by the combustion method(Elsevier Ltd, 2022) Hakami J.; Kaynar Ü.H.; Ayvacikli M.; Coban M.B.; Garcia-Guinea J.; Townsend P.D.; Oglakci M.; Can N.A series of Y1-xAl3(BO3)4:x Tb3+ (x = 0.5 to 7 wt%) phosphors synthesized by a gel combustion method have been systemically investigated by X-ray diffraction (XRD), Fourier transform infrared (FTIR), energy dispersive spectroscopy (EDS), and photoluminescence (PL) as a function of temperature from 300 K to 10 K and 300 K–550 K. An XRD analysis confirms that the phosphors crystallized, and its crystal structure was analysed. The synthesized phosphor matches the XRD pattern provided in the ICSD File No 96-152-6006. The FTIR analysis indicates that nitrates and organic matter have been completely removed and the BO3 groups are present. The broad PL band peaked at 420 nm with a shoulder circa 460 nm of YAl3(BO3)4 is associated with hydrous components which attached to the sample in environmental conditions after synthesis. The PL spectra of YAl3(BO3):Tb3+ phosphors exhibit a bright and narrow green main emission peak at 543 nm corresponding to the 5D4 →7F5 transition under 359 nm excitation. The PL intensity increases with increasing Tb3+ ion concentration up to 5 wt %, followed by evidence for concentration quenching. There is a possibility that higher concentration quenching could be from confinement effects of localised resonant energy transfer. PL data revealed that activation energies for thermal quenching at 485 nm and 543 nm were found to be 0.659 and 0.092 eV, and 0.585 and 0.087 eV, respectively. © 2022 Elsevier Ltd and Techna Group S.r.l.Item Synthesis, characterization and enhanced photoluminescence and temperature dependence of ZrO2:Dy3+ phosphors upon incorporation of K+ ions(Elsevier Ltd, 2023) Can N.; Coban M.B.; Souadi G.; Kaynar Ü.H.; Ayvacikli M.; Garcia Guinea J.; Ekdal Karali E.This study reports the successful synthesis and comprehensive characterization of ZrO2:Dy3+ phosphors with the incorporation of K+ ions. The introduction of Dy3+ and K+ in the ZrO2 lattice as lanthanide activators demonstrates its potential as an efficient host material. The structural integrity of ZrO2 remains unaltered following the doping process. Fourier-transform infrared spectroscopy (FTIR) analysis confirms the presence of Zr-O and O-H stretching, along with H2O bending modes in the phosphor sample. The wide luminescence band seen at 460 nm is attributed to luminescence defects in the ZrO2 induced by oxygen, and the presence of water molecules. Photoluminescence (PL) spectra analysis reveals pronounced emission peaks at 491 and 578 nm, corresponding to 4F9/2 → 6H15/2 and 4F9/2 → 6H13/2 transitions, respectively, upon excitation at 349 nm. Optimizing the Dy3+ doping concentration to 0.4 wt% and achieving a critical distance of 31.82 Å resulted in efficient energy transfer. Notably, co-doping K+ as a charge compensator significantly enhances the luminescence intensity. Moreover, at lower temperatures, direct excitation of Dy3+ ions through our pump wavelength, coupled with exciton-mediated energy transfer, leads to a remarkable increase in PL intensity. Tailoring the doping concentrations effectively shifts the emission spectrum of the phosphor mixture, aligning with the standard white light illumination coordinates (0.333, 0.333). This property positions the material as a promising candidate for applications in white light-emitting diodes (WLEDs) and various high-quality lighting applications. The enhanced photoluminescence and temperature dependence observed in ZrO2:Dy3+ phosphors upon the incorporation of K+ ions pave the way for their potential utilization in advanced luminescent devices. © 2023 Elsevier Ltd and Techna Group S.r.l.Item Phase transition and luminescence characteristics of dysprosium doped strontium stannate phosphor synthesized using hydrothermal method(Elsevier Ltd, 2023) Kaynar Ü.H.; Coban M.B.; Madkhli A.Y.; Ayvacikli M.; Can N.A series of strontium stannate (SrSnO3) doped with Dy3+ ions at various wt % concentrations (1, 2, 3 and 5) were synthesized via hydrothermal reaction and analysed using X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), environmental electron scanning microscope (ESEM), photoluminescence (PL) and, cathodoluminescence (CL). The XRD results confirmed that all samples were assigned to cubic perovskite-type SrSnO3 structured with the Pm3m‾ space group. The PL emission spectrum of Dy3+ activated samples consisted of some characteristic peaks located at 481 nm, 572 nm, 660 nm and 753 nm, corresponding to (4F9/2 → 6H15/2, blue), (4F9/2 → 6H13/2, yellow), 660 nm (4F9/2 → 6H11/2, red) and 753 nm (4F9/2 → 6H9/2, red) transitions. The PL emission line intensity is gradually enhanced with an increase in doping concentration up to 3 wt %, followed by concentration quenching. The confinement effects of localized resonant energy transfer might cause higher concentration quenching. PL emission spectra were affected by the temperature range from 10 K to 300 K. PL emission anomalies at 270 K in SrSnO3:Dy3+ have been reported to be consistent with a structural phase transition at this temperature. This work confirms Singh et al.'s observation, revealing that SrSnO3 has a phase transition at 270 K. © 2022 Elsevier Ltd and Techna Group S.r.l.Item Structural and temperature dependence luminescence characteristics of RE (RE=Eu3+, Dy3+, Sm3+ and Tb3+) in the new gadolinium aluminate borate phosphor(Elsevier Ltd, 2023) Madkhali O.; Kaynar Ü.H.; Alajlani Y.; Coban M.B.; Guinea J.G.; Ayvacikli M.; Pierson J.F.; Can N.GdAl3(BO3)4:Dy3+, Sm3+, Eu3+, and Tb3+ samples were successfully achieved via a sol-gel combustion method. The observed XRD analysis confirms the formation of the desired GAB host, indicating rhombohedral structures that agree well with JPCD card number 72–1985. The FTIR analyses show the detection of B − O stretching and B − O − B bending modes as well as Al − O and Gd − O bonds in the phosphor samples. Energy dispersive spectroscopy (EDS) analysis reveals that Sm, Eu, Dy, and Tb have been successfully doped into GdAl3(BO3)4. The observed broad intrinsic luminescence band can be caused by oxygen-induced luminescence defects in the GAB host with hydrous precursors. The luminescence properties of rare earth ion-doped GdAl3(BO3)4 samples are analysed by photoluminescence spectra, showing their optimal doping concentrations and critical distances of Dy3+, Eu3+, Sm3+ and Tb3+ are 2 wt% − 25.8 Å, 7 wt% − 17 Å, 1 wt% − 32.59 Å, and 7 wt% − 17.03 Å. Additionally, the energy transfer mechanism for luminescence quenching was determined as dipole-dipole (for Dy3+, Eu3+, and Tb3+) or dipole-quadrupole (for Sm3+) and the cross-relaxation process. GdAl3(BO3)4 samples obtained by doping with different RE3+ ions exhibit intense light emissions with different colors originating from different RE3+ ions under 349 nm excitation. When doped with different concentrations of RE3+ ions, the luminescence properties of the samples changed. The synthesized luminescence materials have potential applications in lighting and display technologies. © 2023 Elsevier Ltd and Techna Group S.r.l.Item Characterization, room and low temperature photoluminescence of yttrium aluminium borate activated with Sm3+ ions(Elsevier Ltd, 2023) Madkhli A.Y.; Kaynar Ü.H.; Coban M.B.; Ayvacikli M.; Canimoglu A.; Can N.In this study, the combustion method assisted by urea that is ideally suited to economic and time saving was used for the synthesizing of reddish orange emitting YAl3(BO3)4 phosphor samples doped with various Sm3+ ions (from 0.01 wt% to 7wt%). A detailed study of the structural and luminescence properties at room/low temperature of the synthesized samples was performed. XRD analysis revealed a rhombohedral structure with an R32 space group (155). The particle size was determined by the Scherrer's method to be 48 nm. The visible PL emission spectra upon excitation at 359 nm are recorded and four emission peaks around 564, 599, 646, and 707 nm with transitions 4G5/2 → 6H5/2, 4G5/2 → 6H7/2, 4G5/2 → 6H9/2 and 4G5/2 → 6H11/2 are observed. Concentration quenching was mainly caused by dipole-dipole interactions between neighbouring trivalent Sm3+ ions. Through the CIE chroma coordinates (0.606, 0.382), the optimized sample (x = 0.03) demonstrates admirable luminous performance. YAl3(BO3)4:Sm3+ can be a good candidate for use as a red component for lighting applications. © 2023 Elsevier LtdItem Novel Sm3+ doped YCa4O(BO3)3 phosphors: Structural and, low and room temperature luminescent insights(Elsevier Ltd, 2024) Souadi G.; Amri N.; Kaynar Ü.H.; Coban M.B.; Madkhali O.; Ayvacikli M.; Can N.Inorganic phosphors, known for their ability to capture energy from various sources and emit visible light, have become essential in the development of advanced lighting and display technologies. This study explores YCa4O(BO3)3 (YCOB) as a potential host material for phosphors, focusing on the luminescent properties of YCOB phosphors doped with Sm3+ ions. The successful integration of Sm3+ ions into the YCOB host lattice is confirmed through structural characterization using X-ray diffraction (XRD), Fourier-Transform Infrared Spectroscopy (FTIR), and Energy-Dispersive X-ray Spectroscopy (EDS). Photoluminescence (PL) studies reveal distinct emission spectra with Stark energy level splitting, indicating a cooperative effect between Y3+ and Sm3+ ions. Concentration quenching, mainly attributed to dipole-dipole (d-q) interactions, is observed at higher Sm3+ concentrations. Temperature-dependent PL measurements demonstrate thermal quenching at lower temperatures and increased emission intensity with higher laser power. Thermal quenching is explained by reduced lattice vibrations and electron-phonon interactions, leading to decreased radiative recombination of charge carriers. The CIE chromaticity data position the samples in the orange-red region, emitting vibrant orange-red light. This comprehensive investigation provides insights into the synthesis and luminescent properties of YCOB:Sm3+ phosphors, highlighting their potential applications in luminescent devices. © 2023 Elsevier LtdItem Structural and photoluminescent analysis of novel Eu3+ and Dy3+ Co-doped ZnO nanoparticles by incorporation of Li+ and K+ ions(Elsevier Ltd, 2024) Altowyan A.S.; Coban M.B.; Kaynar U.H.; Çin E.A.; Ayvacikli M.; Hakami J.; Can N.In this study, we thoroughly investigate the structural and luminescent features of ZnO nanoparticles doped with Eu3+ and co-doped with Dy3+, exploring the impact of Li+ and K+ incorporation during the precipitation process. The synthesized nanoparticles were comprehensively characterized using X-ray diffraction (XRD), Fourier transmission infrared (FTIR), Energy dispersive spectroscopy (EDS), and photoluminescence (PL) techniques. The XRD analysis conclusively verified the presence of the hexagonal wurtzite phase in the ZnO nanoparticles. PL assessment of undoped ZnO revealed a well-defined and narrow exciton band peaked at 390 nm, accompanied by a broad defect-related band spanning from 450 nm to 750 nm. For ZnO:Eu3+ phosphors, distinct emission peaks emerged at 590 nm, 618 nm, and 696 nm when excited at 349 nm, corresponding to the 4f electron transition inherent to Eu3+ ions. The optimized doping level for the ZnO:xEu3+ sample was determined to be 7 wt%. The mechanism of concentration quenching was identified as dipole-quadrupole interaction. Co-doping with Li+ as a charge compensator resulted in a threefold enhancement in the luminescence intensity of the red-emitting ZnO:Eu3+, Li+. As the temperature decreases, the luminescence intensity of Eu3+ transitions in ZnO:7 wt% Eu3+ diminishes due to less efficient energy transfer among Eu3+ ions, while the intrinsic broad band from ZnO fades away, emphasizing the temperature-sensitive nature of the material. The addition of Dy3+ as a co-dopant to ZnO:Eu3+ induces a counterintuitive effect, where an increase in Dy3+ concentration unexpectedly results in a decrease in Eu3+ emission peak intensity. This unconventional behavior highlights a complex interplay between Dy3+ and Eu3+ ions, suggesting the influence of spatial factors, competing processes, and potential dopant aggregation within the ZnO lattice. The CIE analysis conducted on ZnO:Eu3+, Dy3+, and Li+ nanoparticles demonstrated precise control over the emitted light, enabling the fine-tuning of their optical properties for applications in displays. © 2024 Elsevier Ltd and Techna Group S.r.l.Item Lattice distortion effects induced by Li+ co-doping on ZnO:Tb3+ phosphors: Photoluminescence and unusual hypersensitive ⁵D₄ → ⁷F₀ transition(Elsevier Ltd, 2024) Altowyan A.S.; Coban M.B.; Kaynar U.H.; Hakami J.; Çin E.A.; Kaynar S.C.; Ayvacikli M.; Can N.A series of Tb3+, Li+ co-doped ZnO phosphors were prepared using a precipitation method. X-ray diffraction (XRD) analysis indicated the successful incorporation of Tb3+ into the ZnO lattice. The influence of Tb3+ doping content and Li+ charge compensator on the photoluminescence (PL) properties of ZnO:Tb3+ was investigated. Under UV excitation, emissions corresponding to electron transitions 5D4→7FJ (J = 0,1,2,3,4,5,6) were observed from Tb3+ ions, including an unusual emission transition at 673 nm, which significantly enriches our understanding of Tb3+ luminescence. The critical concentration quenching of Tb3+ in ZnO:Tb3+ occurs at 7 mol%, as explained by the Van Uitert equation, which attributes this phenomenon to dipole-dipole interactions. Surprisingly, incorporating Li+ for charge balancing led to a reduction in the luminescence intensity of ZnO:7 mol%Tb3+, x%Li+ phosphors (x = 0.01 and 0.07) at 544 nm. This reduction highlights an increased degree of lattice distortion due to Li⁺ inclusion. Furthermore, CIE chromaticity analysis showed that the optimal doping concentration of 0.07 Tb³⁺ shifted the color coordinates towards vivid green, with a color temperature of approximately 6241 K, indicating of neutral white light. © 2024 Elsevier Ltd and Techna Group S.r.l.Item Integrating K+ into Eu and Tb doped GdCa4O(BO3)3: A dual study on photoluminescence and structure(Elsevier B.V., 2024) Altowyan A.S.; Kaynar U.H.; Hakami J.; Coban M.B.; Ayvacikli M.; Aydin H.; Canimoglu A.; Can N.In this study, we investigate the structural and photoluminescence (PL) properties of rare-earth-doped GdCa4O(BO3)3 (GdCOB) phosphors, specifically focusing on the spectral behaviour induced by doping with Eu³⁺ and Tb³⁺ ions. The powder X-ray diffraction (XRD) spectra confirm the formation of a monoclinic phase. The XRD data were also refined by a Rietveld refinement method. The existence of B, O, Ca, Gd, Tb, Eu and K elements was verified by EDS spectra. We introduce a detailed examination of the charge compensation process using Kröger-Vink notation to clarify the mechanisms essential for tailoring the optical properties of the phosphors. The PL excitation spectrum of GdCOB:Eu3+, monitored at 611 nm, reveals sharp excitation peaks at 319, 361, 380, and 392 nm, corresponding to 7F0→5H3, 7F0→5D4, 7F0→7F0, and 7F0→5L6 transitions, respectively. The PL spectrum under excitation of 392 nm exhibits that phosphors doped with Eu3+ a significant red emission at 611 nm, which is attributed to the 5D₀→7F₂ transition. This emission intensity is particularly enhanced at non-centrosymmetric sites of the Eu³⁺ ions. Similarly, the PL excitation spectrum of GdCOB:Tb3+, monitored at 552 nm, displays distinct excitation peaks at 316, 341, 353, and 379 nm, which correspond to the transitions 7F₆→5D₀, 7 F₆→5L₇, 7F₆→5D₂, and 7F₆→5D₃, respectively. Tb³⁺-doped phosphors display a bright green emission, with a dominant peak at 552 nm, resulting from the 5D₄→7F₅ transition. Additionally, the introduction of K⁺ ions as co-dopants results in modifications to the local environments of Eu³⁺ and Tb³⁺ ions. These changes allow for fine-tuning of the emission peaks, significantly enhancing the luminescent output of the phosphors. Optimal doping concentrations of 5 mol% for Eu³⁺ and 1 mol% for Tb³⁺ enhance luminescent intensity and prevent concentration quenching. This phenomenon, often resulting in reduced PL intensity at higher dopant levels, is primarily due to dipole-dipole interactions, consistent with Dexter's theory of energy transfer. Strategic modulation of doping concentrations, coupled with a deep understanding of energy transfer mechanisms are critical for the development of advanced luminescent materials Our analysis of the Commission de l′Eclairage (CIE) chromaticity coordinates reveals enhanced energy transfer dynamics in rare-earth-doped borates, facilitating the tuning of luminescent properties. These results not only deepen our understanding of the fundamental physics governing such phosphors but also open pathways for the development of optoelectronic applications requiring consistent color output, such as LED technologies and solid-state lighting. © 2024 Elsevier B.V.Item Enhanced luminescence of Eu3+ in LaAl2B4O10 via energy transfer from Dy3+ doping(Elsevier B.V., 2024) Kaynar U.H.; Coban M.B.; Hakami J.; Altowyan A.S.; Aydin H.; Ayvacikli M.; Can N.In this study, an investigation was conducted on the structural and photoluminescence (PL) characteristics of LaAl2B4O10 (LAB) phosphors initially incorporated with Dy3+ and Eu3+ ions. Subsequently, the impact of varying Eu3+ concentration while maintaining a constant Dy3+ concentration was examined. Structural characterization was performed using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and energy-dispersive X-ray spectroscopy (EDS). XRD analysis confirmed the effective embedding of both dopants into the hexagonal framework of the LAB. The PL emission spectra revealed characteristic emissions of Dy3+ (blue and yellow) and Eu3+ (red) ions. The optimized dopant concentrations of both Dy3+ and Eu3+ were observed to be 3 wt%. The dominant mechanism for concentration quenching in doped LAB phosphors was determined to be the electric dipole–dipole interaction. Co-doping with Eu3+ led to a substantial decrease in Dy3+ emission intensity (∼0.18-fold) while enhancing Eu3+ emission intensity (∼3.72-fold). The critical energy transfer distance (RC = 11.64 Å) and the analysis based on the Dexter theory confirmed that the energy transfer mechanism corresponds to dipole–dipole interaction. The color purities and correlated color temperatures (CCT) were estimated, suggesting the potential of these phosphors for warm white and red lighting applications, respectively. The observed energy transfer and luminescence properties, along with the structural and compositional characterization, highlight the promising potential of LAB:Dy3+/Eu3+ co-doped phosphors for advanced lighting and display technologies. © 2024 Elsevier B.V.Item Temperature-responsive insights: Investigating Eu3+ and Dy3+ activated yttrium calcium oxyborate phosphors for structure and luminescence(Elsevier Ltd, 2024) Jabali D.A.; Madkhli A.Y.; Souadi G.; Kaynar Ü.H.; Coban M.B.; Madkhali O.; Ayvacikli M.; Amri N.; Can N.An investigation into the luminescent behavior of YCOB (Yttrium Calcium Oxyborate) doped with Eu3+ and Dy3+ ions, synthesized via the combustion method, is presented. The study, employing X-ray diffraction (XRD), Fourier-Transform Infrared Spectroscopy (FTIR), and Energy-Dispersive X-ray Spectroscopy (EDS) analyses, confirms the structural integrity and purity of the synthesized nanophosphors. An XRD pattern exhibiting distinct crystalline peaks indicates that the dopant ions were successfully integrated into the YCOB lattice. The photoluminescence (PL) response of YCOB with Eu3+ and Dy3+ ions is thoroughly examined, uncovering distinct excitation and emission spectra. In the case of Eu3+ doping, excitation spectra reveal a significant charge transfer (CT) band at 254 nm, indicative of electron transfer between oxygen and europium ions. This CT transition enhances our understanding of the excitation behavior, with the dominant and Laporte-forbidden 5D0 → 7F2 transition. Characteristic peaks at 345 nm in the excitation spectra efficiently stimulate YCOB:Dy3+ when Dy3+ is used as a dopant. The primary emission peak at 585 nm corresponds to the hypersensitive electric dipole transition 4F9/2–6H13/2. Concentration quenching phenomena are observed, with a maximum Eu3+ concentration of 7 wt % attributed to the dipole-quadrupole interaction. Dy3+ doping, with a maximum concentration of 2 wt % primarily shows multipolar interactions, especially dipole-dipole interactions. The study extends to CIE chromaticity analysis, emphasizing Eu3+ doping's suitability for white light-emitting diode (WLED) applications and ensuring color stability. Conversely, varying Dy3+ concentrations do not yield consistent chromaticity coordinates. These findings have significant implications for the development of advanced phosphor materials across diverse applications, offering a roadmap for optimizing their optical performance. © 2024 Elsevier LtdItem Temperature-dependent photoluminescence of novel Eu3+, Tb3+, and Dy3+ doped LaCa4O(BO3)3: Insights at low and room temperatures(Elsevier Ltd, 2024) Altowyan A.S.; Coban M.B.; Kaynar U.H.; Hakami J.; Ayvacikli M.; Hiziroglu A.; Can N.This study explores the structural and optical qualities of LaCa4O(BO3)3 (LACOB) phosphors doped with Eu3+, Dy3+, and Tb3+ using a microwave-assisted sol-gel technique. It uncovers oxygen-related luminescence defects in LACOB, highlighting emission peaks at 489 and 585 nm for Dy3+, a distinct sharp peak at 611 nm for Eu3+ in the red spectrum, and a notable green emission for Tb3+ due to specific transitions. The photoluminescence (PL) analysis indicates that luminescence is optimized through precise doping, leveraging dipole interactions, and localized resonant energy transfer, which are influenced by dopant concentration and spatial configuration. Temperature studies show emission intensity variations, particularly noticeable below 100 K for Tb3+ doped samples, demonstrating the nuanced balance between thermal quenching and luminescence efficiency. This temperature dependency, alongside the identified optimal doping conditions, underscores the potential of these materials for advanced photonic applications, offering insights into their thermal behavior and emission mechanisms under different conditions. © 2024 Elsevier LtdItem Structural and temperature-dependent photoluminescence properties of NaBaBO3:Ce3+,Tb3+ phosphors synthesized using the combustion method(Elsevier B.V., 2024) Altowyan A.S.; Oglakci M.; Topaksu M.; Ozturk E.; Hakami J.; Coban M.B.; Ozgur Keskin M.; Ayvacikli M.; Kaynar U.H.; Canimoglu A.; Can N.This study explores the structural and temperature-dependent photoluminescence of Ce3+ and Tb3+ doped NaBaBO3 phosphors, synthesized via combustion. Analysis of their crystal structures confirmed excellent alignment with the standard PDF#98–008-0110. Investigation into both room and low-temperature photoluminescence revealed that the dopants have a significant effect on emission spectra. Ce3+-doped samples exhibited excitation peaks at 275 nm and 358 nm, leading to a primary emission at 419 nm, with enhanced low-temperature emission suggesting reduced non-radiative processes. Tb3+-doped phosphors showed excitation from 250 to 377 nm and emissions from blue to deep red, including strong green emission at 550 nm due to 5D4→7F5 transitions. Optimal doping was found at 1 mol% for Ce3+, while Tb3+ showed increased luminescence up to 3 mol%, with concentration quenching observed beyond these points. The study indicates dipole–dipole interactions dominate Ce3+ concentration quenching, whereas Tb3+ involves both electric dipole and quadrupole interactions. This analysis provides insights into enhancing luminescent efficiency and suggests NaBaBO3:xCe3+,Tb3+ phosphors' potential in advancing white LED technology, highlighting their stable luminescent properties at low temperatures. © 2024 The Society of Powder Technology Japan. Published by Elsevier B.V. and The Society of Powder Technology Japan.Item Novel Tb³⁺-Doped LaAl₂B₄O₁₀ phosphors: Structural analysis, luminescent properties, and energy transfer mechanism(Elsevier Ltd, 2024) Kaynar U.H.; Aydin H.; Hakami J.; Altowyan A.S.; Coban M.B.; Ayvacikli M.; Canimoglu A.; Can N.This study explores the structural and luminescent properties of terbium (Tb³⁺)-doped lanthanum aluminium borate (LaAl₂B₄O₁₀, abbreviated as LAB) phosphors, a novel host lattice for Tb³⁺ doping. LAB:Tb³⁺ phosphors, with varying dopant concentrations, were synthesized using a microwave-assisted combustion synthesis approach and characterized using X-ray diffraction (XRD), Rietveld refinement, and photoluminescence spectroscopy at both room and low temperatures. The structural analysis confirmed the hexagonal crystal structure of LAB and revealed successful incorporation of Tb³⁺ ions without altering the fundamental lattice. Luminescence studies demonstrated that the LAB:Tb³⁺ phosphors show strong green emission primarily attributed to the 5D4→7F5 transition of Tb³⁺. The optimal doping concentration was determined to be 5 wt% Tb³⁺, which provided maximum luminescence efficiency. This concentration also allowed for a critical study of energy transfer mechanisms within the phosphor, revealing dipole-dipole interactions with a critical distance of 9.80 Å between Tb³⁺ ions. Additionally, the CIE chromaticity coordinates of LAB:0.05 Tb³⁺ were precisely determined to be (0.289, 0.4460), indicating the potential for high-quality green emission suitable for solid-state lighting and display technologies. This work not only demonstrates the potential of LAB:Tb3+ as a highly efficient green luminescent material, but also sheds light on the mechanisms responsible for energy transfer and concentration quenching. © 2024 Elsevier Ltd