Browsing by Author "Kaya N."

Now showing 1 - 7 of 7
  • No Thumbnail Available
    Item
    The serum zinc and copper values of the morkaraman and tuj sheep grown up in the pasture conditions in and around kars
    (1998) Kaya N.; Utlu N.; Uyanik B.S.; Özcan A.
    This study was performed on 100 sheep, of which 50 were Morkaraman and 50 were Tuj, grown up in the pasture conditions in and around Kars. The serum zinc and copper values of the animals were analysed with Atomic Absorbtion Spectrophotometre. The serum zinc and copper values were respectively determined as; 40.56 ± 5.6 ug/dl, 80.10 ± 7.49 ug/dl in Morkaramans and, 38.72 ± 5.32 ug/dl. 75.04 ± 6.58 ug/dl in Tujs. There were no significant differences between the value of zinc and copper statistically.
  • No Thumbnail Available
    Item
    Polymeric thermal analysis of C + H and C + H + Ar ion implanted UHMWPE samples
    (2007) Kaya N.; Oztarhan A.M.; Urkac E.S.; Ila D.; Budak S.; Oks E.; Nikolaev A.; Ezdesir A.; Tihminlioglu F.; Tek Z.; Cetiner S.; Muntele C.
    Chemical surface characterization of C + H hybrid ion implanted UHMWPE samples were carried out using DSC (differential scanning calorimeter) and TGA (thermal gravimetric analysis) techniques. Samples were implanted with a fluence of 1017 ion/cm2 and an extraction voltage of 30 kV. The study of TGA and DSC curves showed that: (1) Polymeric decomposition temperature increased, (2) Tm, ΔCp and ΔHm values changed while ΔCp and ΔHm increased. Tg value could not be measured, because of some experimental limitations. However, the increase in ΔHm values showed that Tg values increased, (3) the branch density which indicated the increase in number of cross-link (Mc) decreased in ion implanted samples and (4) increase in ΔHm values indicated increase in crystallinity of implanted surface of UHMWPE samples.
  • No Thumbnail Available
    Item
    Thermal characterization of Ag and Ag + N ion implanted ultra-high molecular weight polyethylene (UHMWPE)
    (2007) Sokullu Urkac E.; Oztarhan A.; Tihminlioglu F.; Kaya N.; Ila D.; Muntele C.; Budak S.; Oks E.; Nikolaev A.; Ezdesir A.; Tek Z.
    Most of total hip joints are composed of ultra-high molecular weight polyethylene (UHMWPE ). However, as ultra-high molecular weight polyethylene is too stable in a body, wear debris may accumulate and cause biological response such as bone absorption and loosening of prosthesis. In this study, ultra-high molecular weight polyethylene samples were Ag and Ag + N hybrid ion implanted by using MEVVA ion implantation technique to improve its surface properties. Samples were implanted with a fluence of 1017 ion/cm2 and extraction voltage of 30 kV. Implanted and unimplanted samples were investigated by thermo-gravimetry analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), optical microscopy (OM) and contact Angle measurement. Thermal characterization results showed that the ion bombardment induced an increase in the % crystallinity, onset and termination degradation temperatures of UHMWPE. © 2007 Elsevier B.V. All rights reserved.
  • No Thumbnail Available
    Item
    Modification of surface morphology of UHMWPE for biomedical implants
    (Materials Research Society, 2007) Oztarhan A.; Urkac E.S.; Kaya N.; Yenigul M.; Tihminlioglu F.; Ezdesir A.; Zimmerman R.; Budak S.; Muntele C.; Chhay B.; Ila D.; Oks E.; Nikolaev A.; Tek Z.; Eltem R.
    Ultra High Molecular Weight Polyethylene (UHMWPE) samples were implanted with metal and metal-gas hybrid ions (Ag, Ag+N, C+H, C+H+Ar, Ti+O) by using improved MEVVA Ion implantation technique [1,2]. An extraction voltage of 30 kV and influence of 1017 ions/cm2 were attempted in this experiment, to change their surface morphologies in order to understand the effect of ion implantation on the surface properties of UHMWPEs. Characterizations of the implanted samples with RBS , ATR - FTIR, spectra were compared with the un-implanted ones . Implanted and unimplanted samples were also thermally characterized by TGA and DSC. It was generally observed that C-H bond concentration seemed to be decreasing with ion implantation and the results indicated that the chain structure of UHMWPE were changed and crosslink density and polymer crystallinity were increased compared to unimplanted ones resulting in increased hardness. It was also observed that nano size cracks (approx.10nm) were significantly disappeared after Ag implantation, which also has an improved antibacterial effect. Contact angle measurements showed that wettability of samples increased with ion implantation. Results showed that metal and metal+gas hybrid ion implantation could be an effective way to improve the surface properties of UHMWPE to be used in hip and knee prosthesis. © 2007 Materials Research Society.
  • No Thumbnail Available
    Item
    An investigation on the effects of a zinc complex on goose genomic DNA
    (Chemical Publishing Co., 2008) Kadir Devrim A.; Arslantas A.; Kaya N.; Necefoglu H.
    A zinc complex with p-aminobenzoate [Zn(p-H2NC6H 4 COO)2(H2O)4]n·1. 5nH2O has been synthesized. The interaction of the complex with genomic DNA was investigated by viscosity measurements and spectrometric methods. The experimental results indicated that complex bound to DNA by intercalative mode via the ligand. In this study, DNA breaking activity of the compound have also been examined through an agarose gel electrophoresis experiment using genomic DNA. The result showed that no DNA breakings took place. The electrophoretic mobility of the bands was observed to decrease slightly as the concentrations of ZnPAB were increased from 0.065 to 0.65 and 65 mM. The change in mobility could be due to a change in conformation of the DNA.
  • No Thumbnail Available
    Item
    Calciotropic hormone levels in fluorosed TUJ sheep
    (2012) Kaya N.; Koçer B.; Devrim A.K.
    Twenty Tuj sheep weighing 31±2 kg were investigated for the effect of chronic fluorosis on their serum parathyroid hormone (PTH) and calcitonin (CT) activity levels. For a period of 9 months, ten of the sheep were exposed to 4 ppm NaF (1.8 ppm F ion) in their drinking water to induce fluorosis. During the study, urinary pH gradually increased from 7.2 to 7.9. In the first 12 weeks, urinary fluoride showed a small increase from 0.9 to 1.2 ppm, but by week 38 at the end of the experiment it had risen to 16 ppm, and the serum PTH levels had decreased (p<0.01), whereas the CT levels had increased (p<0.01) compared to the control group. © 2012 The International Society for Fluoride Research Inc.
  • No Thumbnail Available
    Item
    Investigation of surface-modified EBM printed Ti-6Al-4V alloys for biomedical applications
    (Elsevier B.V., 2022) Demirci S.; Dikici T.; Tünçay M.M.; Dalmış R.; Kaya N.; Kanbur K.; Sargın F.; Güllüoğlu A.N.
    This work aimed to comprehensively assess the influence of various surface modifications on the formation of apatite ability for EBM Ti-6Al-4V alloy. Sandblasting (S), acid-etching (E), sandblasting and acid-etching (SE), anodization (NA), micro-arc oxidations in 1 M H2SO4 solution (SM) and 1 M H3PO4 solution (PM) methods were applied to modify electron beam melted (EBM) Ti-6Al-4V surface. The α/α’-Ti structures and TiO2 phases were detected by XRD. The surface roughness (Ra) values ranged from 0.25 μm and 2.86 μm. The wettability of samples was between around 25° and 104° The SM sample possessed the lowest contact angle. In vitro tests were employed in the simulated body fluid (SBF) solution for 28 days. The samples with different surface textures demonstrated bioactive behaviors. In vitro test results showed that apatite layers formed on the surfaces. The SM sample exhibited good apatite formation ability when the Ca/P ratios were considered. The apatite formation for the SM sample might derive from high roughness, low contact angle value, the existence of Ti-OH groups, and anatase and rutile phases. The SM can be implemented to boost bioactivity on EBM Ti-6Al-4V alloys. © 2022