Browsing by Author "Larguech S."

Now showing 1 - 2 of 2
  • No Thumbnail Available
    Item
    Convective Heat Transfer and Entropy Generation for Nano-Jet Impingement Cooling of a Moving Hot Surface under the Effects of Multiple Rotating Cylinders and Magnetic Field
    (MDPI, 2023) Kolsi L.; Selimefendigil F.; Larguech S.; Ghachem K.; Albalawi H.; Alshammari B.M.; Labidi T.
    In this study, confined slot nano-jet impingement cooling of a hot moving surface is investigated under the combined utilization multiple rotating cylinders and magnetic field. Both convective heat transfer and entropy generation analysis are conducted using a finite element method. Parametric variation of the rotational Reynolds number (Rew between −500 and 500), velocity ratio (VR between 0 and 0.25), Hartmann number (Ha between 0 and 20) and the horizontal location of cylinders (Mx between −8 and 8) are considered. Rotation of the cylinders generally resulted in the degradation of cooling performance while increasing the wall velocity, and the horizontal location of the cylinder was found to positively contribute to this. Heat transfer rate reductions of 20% and 12.5% are obtained using rotations at the highest Rew for the case of stationary (VR = 0) and moving wall (VR = 0.25). When magnetic field at the highest strength is imposed in the rotating cylinder case, the cooling performance is increased by about 18.6%, while it is reduced by about 28% for the non-rotating cylinder case. The hot wall movement contributes, by about 14%, to the overall cooling performance enhancement. Away from the inlet location of the rotating cylinders, thermal performance improvement of 12% is obtained. The entropy generation rises with higher hot wall velocity and higher horizontal distances of the rotating cylinders, while it is reduced with a higher magnetic field for non-rotating cylinders. The best configurations in terms of cooling performance provide 8.7% and 34.2% enhancements for non-rotating and rotating cylinders compared with the reference case of (Rew, VR, Ha, Mx) = (0, 0, 0, 0), while entropy generation becomes 1% and 15% higher. © 2023 by the authors.
  • No Thumbnail Available
    Item
    Nanofluid cooling of a hot rotating circular cylinder employing cross-flow channel cooling on the upper part and multi-jet impingement cooling on the lower part
    (American Institute of Physics, 2024) Selimefendigil F.; Larguech S.; Ghachem K.; Albalawi H.; Alshammari B.M.; Labidi T.; Kolsi L.
    This study explores the convective cooling features of a hot rotating cylinder by using the combined utilization of cross-flow on the upper part and multi-jet impingement on the bottom part. The analysis is performed for a range of jet Reynolds number (Re) values (between 100 and 500), cross-flow Re values (between 100 and 1000), rotational Re values (between −1000 and 1000), cylinder size (between 0.25wj and 3wj in radius), and center placement in the y direction (between −1.5wj and 1.5wj). When the cylinder is not rotating, the average Nu increment becomes 102% at the highest jet Re, while it becomes 140.82% at the highest cross-flow Re. When rations become active, the impacts of cross-flow and jet impingement cooling become slight. As compared to a motionless cylinder, at the highest speed of the rotating cylinder, the average Nu rises by about 357% to 391%. For clockwise rotation of the cylinder, a lager cylinder results an increase in the average Nu by about 86.3%. At the lowest and highest cross-flow impinging jet Re value combinations, cooling performance improvement becomes a factor of 8.1 and 2, respectively. When the size of the cylinder changes, entropy generation becomes significant, while the vertical location of the cylinder has a slight impact on entropy generation. © 2024 Author(s).