An investigation into the wear behavior of aged Alumix321/SiC composites fabricated by hot pressing

Simple item page
dc.contributor.authorDurmuş H.
dc.contributor.authorGül C.
dc.contributor.authorÇömez N.
dc.contributor.authorYurddaşkal M.
dc.date.accessioned2024-07-22T08:08:58Z
dc.date.available2024-07-22T08:08:58Z
dc.date.issued2019
dc.description.abstractAerospace or automobile industries need materials that have a combination of several features such as lightness, high strength, corrosion and wear resistance. With ceramic particulates reinforcement, the properties of aluminum alloys can be greatly improved. The aim of this study is to investigate the effect of precipitation age hardening and the mass percentage of SiC particles on hardness and wear resistance of the 6061 aluminum matrix composites produced by hot pressing. Composites were solution treated at 530 °C for 1.5 h and then artificially aged at 160 °C for 18 h. The ball-on-disc wear test was carried out under 2N load using an alumina ball as the counterpart. The density of the composites was calculated according to Archimedes principle. Porosity tended to increase with increasing SiC reinforcement. Hardness and wear resistance of composites were improved by SiC particles and aging. Maximum hardness and minimum wear loss was obtained heat treated sample that contains 20 wt.% SiC reinforcement. © 2019 CSIC. This is an open-access article distributed under the terms of the Creative Commons Attribution 4.0 International (CC BY 4.0) License.
dc.identifier.DOI-ID10.3989/revmetalm.148
dc.identifier.issn00348570
dc.identifier.urihttp://akademikarsiv.cbu.edu.tr:4000/handle/123456789/14586
dc.language.isoEnglish
dc.publisherCSIC Consejo Superior de Investigaciones Cientificas
dc.rightsAll Open Access; Gold Open Access
dc.subjectAge hardening
dc.subjectAging of materials
dc.subjectAlumina
dc.subjectAluminum alloys
dc.subjectAluminum oxide
dc.subjectAutomotive industry
dc.subjectComposite materials
dc.subjectCorrosion resistance
dc.subjectHardness
dc.subjectHot pressing
dc.subjectPrecipitation (chemical)
dc.subjectReinforcement
dc.subjectSilicon carbide
dc.subjectWear of materials
dc.subject6061 Al alloy
dc.subjectAlumix321
dc.subjectArchimedes principle
dc.subjectCeramic particulates
dc.subjectCorrosion and wear resistance
dc.subjectMass percentage
dc.subjectMaximum hardness
dc.subjectSiC reinforcement
dc.subjectWear resistance
dc.titleAn investigation into the wear behavior of aged Alumix321/SiC composites fabricated by hot pressing
dc.typeArticle

Files

Collections

Scopus Koleksiyonu