Determination and modeling of contact angle of Canola oil and olive oil on a PTFE surface at elevated temperatures using air or steam as surrounding media

Simple item page
dc.contributor.authorAydar A.Y.
dc.contributor.authorRodriguez-Martinez V.
dc.contributor.authorFarkas B.E.
dc.date.accessioned2024-07-22T08:12:31Z
dc.date.available2024-07-22T08:12:31Z
dc.date.issued2016
dc.description.abstractContact angles (CAs) of unused Canola and olive oils on polytetrafluoroethylene (PTFE) were measured, and the effect of oil type, surrounding media, and temperature evaluated. CAs were compared to values predicted by Girifalco-Good-Fowkes-Young (GGFY) equation, and GGFY combined with the Eötvös equation (GGFY-E). Finally, a relationship between the CA and interfacial tension for each oil type was obtained. CAs were measured by the sessile drop method (ramé-hart instrument co.). For oil-air systems, measurements were performed at 23 ± 1 °C, 40 °C, and then every 20 °C until reaching the oils' smoke point (olive oil: 180 °C, Canola oil: 200 °C). The same procedure was followed for oil-steam systems with first and second temperatures of 110 and 120 °C, respectively. Temperature and oil type had a significant effect (P < 0.05) on CAs, while no significant effect of surrounding media was observed. CAs decreased linearly as temperature increased (approximately 0.2°/°C). Error (E%) values were less than 10% for the majority of Canola oil systems and olive oil-air predicted CAs. Using Zisman plots, PTFE's surface tension estimates were determined using Canola and olive oil air systems (16.0 and 18.2 mN/m respectively); both systems showed a linear correlation (r2 = 0.99) between interfacial tension and CA. © 2015 Elsevier Ltd.
dc.identifier.DOI-ID10.1016/j.lwt.2015.08.022
dc.identifier.issn00236438
dc.identifier.urihttp://akademikarsiv.cbu.edu.tr:4000/handle/123456789/16074
dc.language.isoEnglish
dc.publisherAcademic Press
dc.subjectContact angle
dc.subjectSmoke
dc.subjectSteam
dc.subjectSurface tension
dc.subjectVegetable oils
dc.subjectElevated temperature
dc.subjectHigh temperature
dc.subjectLinear correlation
dc.subjectPolytetrafluoroethylene (PTFE)
dc.subjectSessile drop method
dc.subjectSmoke point
dc.subjectSteam systems
dc.subjectZisman plot
dc.subjectOlive oil
dc.titleDetermination and modeling of contact angle of Canola oil and olive oil on a PTFE surface at elevated temperatures using air or steam as surrounding media
dc.typeArticle

Files

Collections

Scopus Koleksiyonu