Wear behavior and corrosion properties of Age-hardened AA2010 aluminum alloy
dc.contributor.author | Çömez N. | |
dc.date.accessioned | 2024-07-22T08:05:57Z | |
dc.date.available | 2024-07-22T08:05:57Z | |
dc.date.issued | 2021 | |
dc.description.abstract | This study aims to investigate the wear and corrosion resistance after heat treatment of AA2010 alloy. AA2010 alloy was solutionized at 500 °C for 1 h, and then quenched in water at room temperature. Solu-tion treatment was followed by aging treatment at 160 °C for 16, 18, and 22 h. Peak hardness was achieved at 18 h. Ball-on-disc wear test caused cold deformation and hence increased the hardness of the worn surface lo-cally. The corrosion rate of heat treated AA2010 alloy was determined according to Tafel extrapolation meth-od. Corrosion test was carried out in 3.5 wt.% NaCl solution at room temperature. The minimum corrosion rate was obtained in 18 h aged AA2010 alloy. For moderate wear resistance and good corrosion resistance, 18 h aging is recommended for AA2010 alloy. Both the intergranular and pitting corrosion mechanisms were observed on the corroded surface of the AA2010 alloy. © 2021 CSIC Consejo Superior de Investigaciones Cientificas. All rights reserved. | |
dc.identifier.DOI-ID | 10.3989/revmetalm.201 | |
dc.identifier.issn | 00348570 | |
dc.identifier.uri | http://akademikarsiv.cbu.edu.tr:4000/handle/123456789/13314 | |
dc.language.iso | English | |
dc.publisher | CSIC Consejo Superior de Investigaciones Cientificas | |
dc.rights | All Open Access; Gold Open Access | |
dc.subject | Aluminum alloys | |
dc.subject | Aluminum corrosion | |
dc.subject | Corrosion rate | |
dc.subject | Corrosion resistance | |
dc.subject | Corrosion resistant alloys | |
dc.subject | Corrosive effects | |
dc.subject | Hardness | |
dc.subject | Heat resistance | |
dc.subject | Intergranular corrosion | |
dc.subject | Pitting | |
dc.subject | Textures | |
dc.subject | Wear of materials | |
dc.subject | Wear resistance | |
dc.subject | After-heat treatment | |
dc.subject | Ageing treatments | |
dc.subject | Ball-on-disk wear tests | |
dc.subject | Behaviour properties | |
dc.subject | Corrosion property | |
dc.subject | Peak hardness | |
dc.subject | Tafel | |
dc.subject | Wear and corrosion resistance | |
dc.subject | Wear behaviors | |
dc.subject | Wear corrosion | |
dc.subject | Sodium chloride | |
dc.title | Wear behavior and corrosion properties of Age-hardened AA2010 aluminum alloy | |
dc.type | Article |