Microstructural properties and tribological behaviours of ultra-high frequency induction rapid sintered Al-WC composites; [Propiedades microestructurales y comportamiento tribológico de composites Al-WC sinterizados mediante inducción rápida a ultra alta frecuencia]

Simple item page
dc.contributor.authorÇavdar U.
dc.contributor.authorGezici L.U.
dc.contributor.authorGül B.
dc.contributor.authorAyvaz M.
dc.date.accessioned2024-07-22T08:08:05Z
dc.date.available2024-07-22T08:08:05Z
dc.date.issued2020
dc.description.abstractIn this study, sinterability of 1, 3, 5, 9 and 15 wt.% WC reinforced aluminum matrix composite samples by induction fast and conventional sintering methods was investigated. For this purpose, firstly, it was pressed by unaxial cold pressing method under 200 MPa pressure. Some of these raw samples were sintered by ultra-high frequency induction fast sintering method at 600 °C temperature for 300 sec., while the other part of the samples were sintered by 600 °C for 1800 sec. The density and hardness values of sintered composite samples were measured and microstructural properties, abrasion and friction behaviours were investigated. In this study, it was seen that increased WC reinforcement ratio and abrasion resistance and friction coefficient increased together. In addition, this study showed that ultra-high frequency sintering is as successful as traditional method in Al-WC composite production. Copyright: © 2020 CSIC.
dc.identifier.DOI-ID10.3989/revmetalm.163
dc.identifier.issn00348570
dc.identifier.urihttp://akademikarsiv.cbu.edu.tr:4000/handle/123456789/14257
dc.language.isoEnglish
dc.publisherCSIC Consejo Superior de Investigaciones Cientificas
dc.rightsAll Open Access; Gold Open Access
dc.subjectAbrasion
dc.subjectErosion
dc.subjectFriction
dc.subjectPartial discharges
dc.subjectReinforcement
dc.subjectSintering
dc.subjectTribology
dc.subjectConventional sintering
dc.subjectFriction behaviour
dc.subjectFriction coefficients
dc.subjectMicro-structural properties
dc.subjectReinforced aluminum
dc.subjectReinforcement ratios
dc.subjectTribological behaviour
dc.subjectUltra-high frequency
dc.subjectAluminum compounds
dc.titleMicrostructural properties and tribological behaviours of ultra-high frequency induction rapid sintered Al-WC composites; [Propiedades microestructurales y comportamiento tribológico de composites Al-WC sinterizados mediante inducción rápida a ultra alta frecuencia]
dc.typeArticle

Files

Collections

Scopus Koleksiyonu