A comparison of cooling methods in the pocket milling of AA5083-H36 alloy via Taguchi method

Simple item page
dc.contributor.authorPinar A.M.
dc.contributor.authorFiliz S.
dc.contributor.authorÜnlü B.S.
dc.date.accessioned2024-07-22T08:12:04Z
dc.date.available2024-07-22T08:12:04Z
dc.date.issued2016
dc.description.abstractIn this study, classical and vortex tube cooling methods are compared in the pocket machining of AA5083-H36 alloy with uncoated cemented carbide cutting tool. The effects of cutting speed, feed rate, axial/radial depth of cut and nose radius and their two-way interactions on the surface roughness, and the optimization of surface roughness are investigated via Taguchi method. The experiments conducted based on Taguchi’s L16 orthogonal array (OA) are assessed with analysis of variance (ANOVA) and signal to noise (S/N) ratio. As a result, in both cooling methods, it is obtained that roughness correlates negatively with cutting speed and radial depth of cut and positively with feed rate and axial depth of cut. While in the cooling with vortex tube, lower average Ra values are observed in the experiments with the nose radius of 0.8 mm, in the classical cooling almost no change is obtained. Lastly, optimum roughnesses for the classical and vortex tube cooling are obtained as 0.164 and 0.188 μm, respectively. © 2015, Springer-Verlag London.
dc.identifier.DOI-ID10.1007/s00170-015-7666-1
dc.identifier.issn02683768
dc.identifier.urihttp://akademikarsiv.cbu.edu.tr:4000/handle/123456789/15887
dc.language.isoEnglish
dc.publisherSpringer-Verlag London Ltd
dc.subjectCarbide cutting tools
dc.subjectCarbides
dc.subjectCooling
dc.subjectCutting
dc.subjectCutting tools
dc.subjectMilling (machining)
dc.subjectOptimization
dc.subjectSignal to noise ratio
dc.subjectSurface roughness
dc.subjectTaguchi methods
dc.subjectVortex flow
dc.subjectAxial depth of cut
dc.subjectCemented carbide cutting tools
dc.subjectCooling methods
dc.subjectCooling strategy
dc.subjectOrthogonal array
dc.subjectPocket machining
dc.subjectSignal to noise (S/N) ratios
dc.subjectTwo-way interaction
dc.subjectAnalysis of variance (ANOVA)
dc.titleA comparison of cooling methods in the pocket milling of AA5083-H36 alloy via Taguchi method
dc.typeArticle

Files

Collections

Scopus Koleksiyonu