Design and production of dye-synthesized solar cells with FTO/TiO2/ferroelectric dye/electrolyte/Pt/FTO architecture

Simple item page
dc.contributor.authorOzkan, DC
dc.contributor.authorTurk, A
dc.contributor.authorCelik, E
dc.date.accessioned2025-04-10T10:34:13Z
dc.date.available2025-04-10T10:34:13Z
dc.description.abstractA new approach for the application of dye-synthesized solar cells is realized by using perovskite and single oxide micro/nanopowders. With respect to the literature, the desired energy efficiency of dye-synthesized solar cells is a priori established as perovskite and single oxide micro/nanopowders in a composite structure. In the present work, in order to produce dye-synthesized solar cells with FTO/TiO2/ferroelectric/dye/electrolyte/Pt/FTO architecture, their precursor solutions were prepared by using nitrate-based salts, solvents, and chelating agents. The obtained gel films were dried at 200 degrees C for 2 h and then annealed at temperatures of 500 degrees C and 850 degrees C for 2 h in the air. TiO2 and LaFeO3 powders were characterized through DTA-TGA, FTIR, XRD, SEM, and UV-Vis spectrometer machines. In line with the results obtained, dye-sensitized solar cell production, which can also be called ferroelectric photovoltaic cells with a combination of TiO2, was produced. It was found that the production of continuously applicable and sustainable dye-sensitive solar cells using LaFeO3 with together TiO2 powders can be useful as innovative and futuristic approaches.
dc.identifier.e-issn2510-1579
dc.identifier.issn2510-1560
dc.identifier.urihttp://hdl.handle.net/20.500.14701/40418
dc.language.isoEnglish
dc.titleDesign and production of dye-synthesized solar cells with FTO/TiO2/ferroelectric dye/electrolyte/Pt/FTO architecture
dc.typeArticle

Files

Collections

Web of Science Koleksiyonu