Filtration and removal performances of membrane adsorbers

dc.contributor.authorYurekli Y.
dc.contributor.authorYildirim M.
dc.contributor.authorAydin L.
dc.contributor.authorSavran M.
dc.date.accessioned2024-07-22T08:11:24Z
dc.date.available2024-07-22T08:11:24Z
dc.date.issued2017
dc.description.abstractMembrane adsorbers are promising candidates for the efficient and effective removal of heavy metals in waste water due to their unattainable adsorption and filtration capabilities. In the present study, zeolite nanoparticles incorporated polysulfone (PSf10) membrane was synthesized by means of non-solvent induced phase separation technique for the removal of lead and nickel ions in water. PSf10 showed a remarkable sorption capability and after repeated (adsorption/desorption)5 cycles in batch experiments, it preserved 77% and 92% of its initial sorption capacity for the lead and nickel, respectively. Addition of nanoparticles increased the pore radius of the native PSf from 10 to 19 nm, while bovine serum albumin rejection remained unchanged at 98%. Increments in the pore size and enhancement in hydrophilicity caused to increase hydraulic permeability of the native PSf from 23 to 57 L/m2 h bar. Cross-flow filtration studies revealed that the filtrate concentrations were inversely affected by the initial metal concentration and transmembrane pressure due to reaction limited region. Nonlinear rational regression model perfectly described the filtration behavior of the PSf10 within the experimental range and suggested that lower initial metal concentration and pressure with a short filtration time should be selected for the target response to be minimum. © 2017 Elsevier B.V.
dc.identifier.DOI-ID10.1016/j.jhazmat.2017.02.061
dc.identifier.issn03043894
dc.identifier.urihttp://akademikarsiv.cbu.edu.tr:4000/handle/123456789/15650
dc.language.isoEnglish
dc.publisherElsevier B.V.
dc.subjectBovinae
dc.subjectAdsorption
dc.subjectBody fluids
dc.subjectChemicals removal (water treatment)
dc.subjectHeavy metals
dc.subjectLead removal (water treatment)
dc.subjectNanoparticles
dc.subjectNickel
dc.subjectPhase separation
dc.subjectPore size
dc.subjectRegression analysis
dc.subjectSynthesis (chemical)
dc.subjectWater filtration
dc.subjectZeolites
dc.subjectbovine serum albumin
dc.subjectlead
dc.subjectnanoparticle
dc.subjectnickel
dc.subjectpolysulfone
dc.subjectwater
dc.subjectzeolite
dc.subjectAdsorption/desorption
dc.subjectBovine serum albumins
dc.subjectCross flow filtration
dc.subjectHeavy metals removals
dc.subjectHydraulic permeability
dc.subjectMembrane adsorber
dc.subjectRational regression
dc.subjectTransmembrane pressures
dc.subjectadsorption
dc.subjectexperimental study
dc.subjectfiltration
dc.subjectheavy metal
dc.subjectmembrane
dc.subjectnanoparticle
dc.subjectperformance assessment
dc.subjectpermeability
dc.subjectpollutant removal
dc.subjectregression analysis
dc.subjectwastewater treatment
dc.subjectadsorption
dc.subjectArticle
dc.subjectconcentration (parameters)
dc.subjectcontrolled study
dc.subjectcrossflow filtration
dc.subjectdesorption
dc.subjectfeasibility study
dc.subjectheavy metal removal
dc.subjecthydraulic permeability
dc.subjecthydrophilicity
dc.subjectmeasurement error
dc.subjectnanopore
dc.subjectparticle size
dc.subjectphase separation
dc.subjectporosity
dc.subjectpressure
dc.subjectreaction analysis
dc.subjectresponse surface method
dc.subjecttemperature
dc.subjectwaste water management
dc.subjectwaste water recycling
dc.subjectMicrofiltration
dc.titleFiltration and removal performances of membrane adsorbers
dc.typeArticle

Files