Investigation of tribological properties of polypropylene (PP)—Acrylonitrile butadiene styrene (ABS) blends reinforced with graphene nano-platelets (GNPs)

Simple item page
dc.contributor.authorKarteri̇ İ.
dc.contributor.authorÖge M.
dc.contributor.authorKüçük Y.
dc.contributor.authorÖzdemi̇r Öge T.
dc.contributor.authorÖzdemi̇r F.B.
dc.contributor.authorKarataşlı M.
dc.contributor.authorÇulha M.A.
dc.contributor.authorBabacan T.
dc.date.accessioned2024-07-22T08:02:49Z
dc.date.available2024-07-22T08:02:49Z
dc.date.issued2023
dc.description.abstractThe tribological response of PP-ABS/GNPs nanocomposites fabricated via extrusion and injection molding with varying wt% GNPs fractions were examined under varying normal load and sliding speed wear test parameters. The specimens with 3% GNPs and 11% GNPs respectively exhibited the lowest and highest specific wear rates and COF under all test conditions. Increased load led to significantly reduced COF values, whereas increased sliding speed led to a slight reduction in COF by contributing to the formation of a continuous transfer layer. Addition of GNPs helped to retain the worn material on the contact surface and led to improved wear resistance up to the weight fraction of 3% after which non-homogeneous dispersion of GNPs occurred. © 2023 Elsevier Ltd
dc.identifier.DOI-ID10.1016/j.triboint.2023.108419
dc.identifier.issn0301679X
dc.identifier.urihttp://akademikarsiv.cbu.edu.tr:4000/handle/123456789/12006
dc.language.isoEnglish
dc.publisherElsevier Ltd
dc.subjectButadiene
dc.subjectInjection molding
dc.subjectPlatelets
dc.subjectPolypropylenes
dc.subjectReinforced plastics
dc.subjectStyrene
dc.subjectTribology
dc.subjectWear of materials
dc.subjectWear resistance
dc.subjectAcrylonitrile-butadiene-styrene
dc.subjectDry sliding wear
dc.subjectGraphene nano-platelet
dc.subjectLoad speed
dc.subjectNanoplatelet
dc.subjectNormal loads
dc.subjectProperty
dc.subjectSliding speed
dc.subjectTribological properties
dc.subjectTribological response
dc.subjectGraphene
dc.titleInvestigation of tribological properties of polypropylene (PP)—Acrylonitrile butadiene styrene (ABS) blends reinforced with graphene nano-platelets (GNPs)
dc.typeArticle

Files

Collections

Scopus Koleksiyonu