Mechanical properties of heat treated iron based compacts
No Thumbnail Available
Date
2015
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
In this study, powder metal (PM) compacts were prepared by mixing iron powder with 1-6. wt.% ratio of Cu and 0.2-0.8. wt.% ratio of graphite. The 20 different PM compacts compositions were prepared with a 0.8. wt.% ratio of zinc striate as the lubricant. The dimension of compacts were 10. ×. 10. ×. 55. mm. All the compacts were pressed at 600. MPa and, sintered at 1120. °C for 30. min using a conventional sintering furnace and then boronizing, steaming and carbo-nitriding heat treatments were applied. The results of all compacts for the bending test, microstructure images and HV microhardness results were compared. As a result of the experiments, it was concluded that, the highest bending strength was obtained at carbo-nitrided samples, the highest surface hardness was measured at boronized samples and all these heat treatments increase the densities of iron based samples. © 2014 Elsevier Ltd.