Tribological properties of boronized ferrous based PM journal bearings

Simple item page
dc.contributor.authorÜnlü B.S.
dc.contributor.authorYilmaz S.S.
dc.contributor.authorKurgan N.
dc.contributor.authorVarol R.
dc.date.accessioned2024-07-22T08:14:22Z
dc.date.available2024-07-22T08:14:22Z
dc.date.issued2015
dc.description.abstractFerrous based PM (powder metallurgical) materials are widely used in journal bearings since they provide a good tribological performance. These bearings are self-lubricating and can be used in places where lubricating is not possible. This also applies to the shaft material which shows adhesive wear. Tribological properties can be improved and adhesive wear can be decreased by boronizing. In this study, tribological properties of ferrous based boronized and non-boronized Fe-graphite, FeCu-graph-ite and CuSnFe-graphite bearings manufactured by PM method have been determined and compared. Boronizing treatment was carried out at 950°C for 4 hours. The SAE 1050 steel shaft was used as counter abrader. Experiments were carried out at 20 N loads and 1500 rpm every 30 minutes for 2.5 hours. © Carl Hanser Verlag, München. © Carl Hanser Verlag GmbH & Co. KG.
dc.identifier.DOI-ID10.3139/120.110700
dc.identifier.issn00255300
dc.identifier.urihttp://akademikarsiv.cbu.edu.tr:4000/handle/123456789/16569
dc.language.isoEnglish
dc.publisherCarl Hanser Verlag
dc.subjectGraphite
dc.subjectIron
dc.subjectJournal bearings
dc.subjectLubrication
dc.subjectMetallurgy
dc.subjectPowder metallurgy
dc.subjectSintering
dc.subjectTribology
dc.subjectAdhesive wears
dc.subjectBoronizing
dc.subjectBoronizing treatment
dc.subjectPowder metallurgical
dc.subjectSelf-lubricating
dc.subjectShaft material
dc.subjectTribological performance
dc.subjectTribological properties
dc.subjectSelf lubricating bearings
dc.titleTribological properties of boronized ferrous based PM journal bearings
dc.typeArticle

Files

Collections

Scopus Koleksiyonu