Effect of Ekabor 2 powder on the mechanical properties of pure iron powder metal compacts

Simple item page
dc.contributor.authorAltintaş A.
dc.contributor.authorSarigün Y.
dc.contributor.authorÇavdar U.
dc.date.accessioned2024-07-22T08:11:53Z
dc.date.available2024-07-22T08:11:53Z
dc.date.issued2016
dc.description.abstractEkabor 2 powder of different weights, used by V type powder mixture was mixed with pure iron powder. Specimens were created by dry pressing into die followed by cold isostatic press at a pressure of 100 bar for purpose of resizing. The conventional sintering process at 900 °C and 950 °C was carried out for 4 h using conventional furnaces. Specimens were gradually cooled by air. The sintered pellets were examined in terms of density, wear abrasion, surface roughness and hardness at 900 °C and 950 °C. Microstructure of pellets was observed with optic microscope. The results show that the hardness gradually increased with additions of 0 wt. % to 10 wt. % of Ekabor 2 however, after 10 wt. %, this hardness tended to decrease. Copyright: © 2016 CSIC.
dc.identifier.DOI-ID10.3989/revmetalm.073
dc.identifier.issn00348570
dc.identifier.urihttp://akademikarsiv.cbu.edu.tr:4000/handle/123456789/15823
dc.language.isoEnglish
dc.publisherCentro Nacional de Investigaciones Metalurgicas
dc.rightsAll Open Access; Gold Open Access; Green Open Access
dc.subjectHardness
dc.subjectIron
dc.subjectIron powder
dc.subjectMechanical properties
dc.subjectPelletizing
dc.subjectPowders
dc.subjectSintering
dc.subjectSurface roughness
dc.subjectCold isostatic press
dc.subjectConventional furnace
dc.subjectConventional sintering
dc.subjectDry pressing
dc.subjectEkabor 2
dc.subjectPowder mixtures
dc.subjectPure iron
dc.subjectSintered pellets
dc.subjectPowder metals
dc.titleEffect of Ekabor 2 powder on the mechanical properties of pure iron powder metal compacts
dc.typeArticle

Files

Collections

Scopus Koleksiyonu