Browsing by Subject "Tissue Engineering"

Now showing 1 - 9 of 9
  • No Thumbnail Available
    Item
    The effect of autologous bone marrow stromal cells differentiated on scaffolds for canine tibial bone reconstruction
    (Taylor and Francis Ltd., 2015) Ozdal-Kurt F.; Tuʇlu I.; Vatansever H.; Tong S.; Deliloʇlu-Gurhan S.
    Bone marrow contains mesenchymal stem cells that form many tissues. Various scaffolds are available for bone reconstruction by tissue engineering. Osteoblastic differentiated bone marrow stromal cells (BMSC) promote osteogenesis on scaffolds and stimulate bone regeneration. We investigated the use of cultured autologous BMSC on different scaffolds for healing defects in tibias of adult male canines. BMSC were isolated from canine humerus bone marrow, differentiated into osteoblasts in culture and loaded onto porous ceramic scaffolds including hydroxyapatite 1, hydroxyapatite gel and calcium phosphate. Osteoblast differentiation was verified by osteonectine and osteocalcine immunocytochemistry. The scaffolds with stromal cells were implanted in the tibial defect. Scaffolds without stromal cells were used as controls. Sections from the defects were processed for histological, ultrastructural, immunohistochemical and histomorphometric analyses to analyze the healing of the defects. BMSC were spread, allowed to proliferate and differentiate to osteoblasts as shown by alizarin red histochemistry, and osteocalcine and osteonectine immunostaining. Scanning electron microscopy showed that BMSC on the scaffolds were more active and adhesive to the calcium phosphate scaffold compared to the others. Macroscopic bone formation was observed in all groups, but scaffolds with stromal cells produced significantly better results. Bone healing occurred earlier and faster with stromal cells on the calcium phosphate scaffold and produced more callus compared to other scaffolds. Tissue healing and osteoblastic marker expression also were better with stromal cells on the scaffolds. Increased trabecula formation, cell density and decreased fibrosis were observed in the calcium phosphate scaffold with stromal cells. Autologous cultured stromal cells on the scaffolds were useful for healing of canine tibial bone defects. The calcium phosphate scaffold was the best for both cell differentiation in vitro and bone regeneration in vivo. It may be possible to improve healing of bone defects in humans using stem cells from bone marrow. © 2015 The Biological Stain Commission.
  • No Thumbnail Available
    Item
    Synthesis and characterization of cerium- and gallium-containing borate bioactive glass scaffolds for bone tissue engineering
    (Kluwer Academic Publishers, 2015) Deliormanlı A.M.
    Bioactive glasses are widely used in biomedical applications due to their ability to bond to bone and even to soft tissues. In this study, borate based (13-93B3) bioactive glass powders containing up to 5 wt% Ce2O3 and Ga2O3 were prepared by the melt quench technique. Cerium (Ce+3) and gallium (Ga+3) were chosen because of their low toxicity associated with bacteriostatic properties. Bioactive glass scaffolds were fabricated using the polymer foam replication method. In vitro degradation and bioactivity of the scaffolds were evaluated in SBF under static conditions. Results revealed that the cerium- and gallium-containing borate glasses have much lower degradation rates compared to the bare borate glass 13-93B3. In spite of the increased chemical durability, substituted glasses exhibited a good in vitro bioactive response except when the Ce2O3 content was 5 wt%. Taking into account the high in vitro hydroxyapatite forming ability, borate glass scaffolds containing Ce+3 and Ga+3 therapeutic ions are promising candidates for bone tissue engineering applications. © 2015, Springer Science+Business Media New York.
  • No Thumbnail Available
    Item
    Electrically conductive borate-based bioactive glass scaffolds for bone tissue engineering applications
    (SAGE Publications Ltd, 2017) Turk M.; Deliormanll A.M.
    In this study, electrically conductive, borate-based, porous 13-93B3 bioactive glass composite scaffolds were prepared using a polymer foam replication technique. For this purpose, a slurry containing 40 vol% glass particles and 0-10 wt% graphene nanoplatelets was prepared by dispersing the particles in ethanol in the presence of ethyl cellulose. Composite scaffolds were subjected to a controlled heat treatment, in air atmosphere, to decompose the foam and sinter the glass particles into a dense network. It was found that the applied heat treatment did not influence the structure of graphene in the glass network. Graphene additions did not negatively affect the mechanical properties and enhanced the electrical conductivity of the glass scaffolds. In X-ray diffraction analysis, the crystalline peak corresponding to hydroxyapatite was observed in all the samples suggesting that all of the samples were bioactive after 30 days of immersion in simulated body fluid. However, Fourier transform infrared spectroscopy analysis and scanning electron microscope observations revealed that hydroxyapatite formation rate decreased with increasing graphene concentration especially for samples treated in simulated body fluid for shorter times. Based on the cytotoxicity assay findings, the MC3T3-E1 cell growth was significantly inhibited by the scaffolds containing higher amount of graphene compared to bare glass scaffolds. Best performance was obtained for 5 wt% graphene which yielded an enhancement of electrical conductivity with moderate cellular response and in vitro hydroxyapatite forming ability. The study revealed that the electrically conductive 13-93B3 graphene scaffolds are promising candidates for bone tissue engineering applications. © The Author(s) 2017.
  • No Thumbnail Available
    Item
    Biological Response of Osteoblastic and Chondrogenic Cells to Graphene-Containing PCL/Bioactive Glass Bilayered Scaffolds for Osteochondral Tissue Engineering Applications
    (Humana Press Inc., 2018) Deliormanlı A.M.; Atmaca H.
    Graphene-containing 13-93 bioactive glass and poly(ε-caprolactone)-based bilayer, electrically conductive scaffolds were prepared for osteochondral tissue repair. Biological response of osteoblastic MC3T3-E1 and chondrogenic ATDC5 cells to the composite scaffolds was assessed under mono-culture and co-culture conditions. Cytotoxicity was investigated using MTT assay, cartilage matrix production was evaluated by Alcian blue staining, and mineralization of both types of cells in the different culture systems was observed by Alizarin red S staining. Results showed that osteoblastic and chondrogenic cells utilized in the study did not show toxic response to the prepared scaffolds under mono-culture conditions and higher cell viability rates were obtained in co-culture conditions. Larger mineralized areas were determined under co-culture conditions and calcium deposition amount significantly increased compared with that in control group samples after 21 days. Additionally, the amount of glycosaminoglycans synthesized in co-culture was higher compared to mono-culture conditions. Electric stimulation applied under mono-culture conditions suppressed the viability of MC3T3-E1 cells whereas it enhanced the viability rates of ATDC5 cells. The study suggests that the designed bilayered osteochondral constructs have the potential for osteochondral defect repair. © 2018, Springer Science+Business Media, LLC, part of Springer Nature.
  • No Thumbnail Available
    Item
    Novel simple strategy for cartilage tissue engineering using stem cells and synthetic polymer scaffold
    (Lippincott Williams and Wilkins, 2019) Uz U.; Gunhan K.; Vatansever S.; Kivanc M.; Yuceturk A.V.
    Cartilage created by tissue engineering is a promising new development in facial reconstructive surgery. The purpose of this study was to evaluate the histological results of implantation of synthetic polymer scaffold with chondrocytes differentiated from adipose-derived mesenchymal stem cells. Adipose tissue obtained from Wistar albino rats was dissociated, incubated and placed in culture medium. After a sufficient level of stem cell proliferation, the differentiation phase was started. Cells were collected on the 7th and 21st day of culture for chondrogenic characterization. After the 21st day of the differentiation phase of chondrocytes, they were transferred onto poly(dl-lactide-epsilon-caprolactone) synthetic polymer and culture continued for 24 hours. The scaffold with chondrocytes was then implanted into a subcutaneous area of skin on the back of the neck of the rat. Six weeks after implantation, all rats were sacrificed and the implantation areas were analyzed. Chondrocytes derived from adipogenic mesenchymal stem cells were stained positively with collagen II, aggrecan and Sox-9 after the differentiation stages. Histological examination of the excised material showed that chondrocytes were present, and the scaffold had been completely absorbed. The results of this study indicate that the differentiation method from mesenchymal stem cells to chondrogenic lineage was straightforward and scaffold with cells was easily accessible. This technique may be a good option for cartilage tissue engineering. © 2019 by Mutaz B. Habal, MD
  • No Thumbnail Available
    Item
    Direct Write Assembly of Graphene/Poly(ε-Caprolactone) Composite Scaffolds and Evaluation of Their Biological Performance Using Mouse Bone Marrow Mesenchymal Stem Cells
    (Humana Press Inc., 2019) Deliormanlı A.M.
    Scaffold and mesenchymal stem cell–based cartilage tissue engineering offers a favorable way for the repair and regeneration of injured cartilage. In this study, poly (ε-caprolactone) PCL scaffolds with grid-like structure having periodic lattice was manufactured by robocasting method in the presence of graphene nanoplatelets for cartilage tissue engineering applications. For this purpose, a PCL solution (20 wt%) containing pristine graphene nanopowders in the form of platelets was prepared as printing ink and it was dispensed through a nozzle at room temperature to an ethanol bath at 4 °C. The construction of porous scaffolds was made by a layer-by-layer assembly. Results revealed that graphene additions were not detrimental to deposition process and the structure of the resultant scaffolds. In vitro cell tests indicated that the prepared grid-like graphene/PCL composite scaffolds have good cytocompatibility and non-toxicity for mouse bone marrow mesenchymal stem cells. The stem cells attached and proliferated well on the scaffolds and they also demonstrated a chondrogenic differentiation in the absence of transforming growth factors. © 2019, Springer Science+Business Media, LLC, part of Springer Nature.
  • No Thumbnail Available
    Item
    Effect of polycaprolactone scaffolds containing different weights of graphene on healing in large osteochondral defect model
    (Taylor and Francis Ltd., 2022) Basal O.; Ozmen O.; Deliormanli A.M.
    Now it is possible to combine the different biomaterial properties of graphene and 3 D printing scaffolds produced by tissue engineering for cartilage repair. In the study graphene-containing (1, 3, 5, 10 wt%), porous and oriented poly-ε-caprolactone-based scaffolds were prepared by robocasting method to use in the regeneration of large osteochondral defects. The scaffolds were implanted into the full-thickness osteochondral defect in a rabbit model to evaluate the regeneration of the defect in vivo. For this purpose, twenty female New Zealand white rabbits were used and they were euthanized at 4 and 8 weeks of implantation. The reparative osteochondral tissues were harvested from rabbit distal femurs and then processed for gross appearance assessment, radiographic imaging, histopathological, histochemical and immunohistochemical examinations. Results revealed that graphene-containing graft materials caused significant amelioration at the defect areas. Graphene-containing graft materials improved the fibrous, chondroid and osseous tissue regeneration compared to the control group. The expressions of bone morphogenetic protein-2 (BMP-2), collagen-1 (col-1), vascular endothelial growth factor (VEGF) and alkaline phosphatase (ALP) expressions were more prominent in graphene-containing PCL implanted groups (p <.001). Picrosirrius red method was used for to evaluate connective and muscle tissues. Results also revealed that the ameliorative effect of graphene increased by the elevation in concentration. The most prominent healing was observed in 10 wt% graphene-containing PCL based composite scaffold implanted group. This study results showed that graphene-containing PCL scaffolds enhanced the healing significantly in large osteochondral defect areas compared to the control groups. © 2022 Informa UK Limited, trading as Taylor & Francis Group.
  • No Thumbnail Available
    Item
    Liquid crystal-based elastomers in tissue engineering
    (John Wiley and Sons Inc, 2022) Gurboga B.; Tuncgovde E.B.; Kemiklioglu E.
    Liquid crystal elastomers (LCEs) play role in tissue engineering investigations, with the combination of orientational ordering generated by liquid crystal (LC) moieties and the elastic capabilities of polymers. Liquid crystal-based polymer materials require a thorough understanding of their features that set them apart from other smart materials for proper design and application. LCEs offer many advantages for their widespread use in the field of biomaterials, by virtue of their simplicity of processing, anisotropic behavior, and responding to numerous external stimuli. Especially, LCEs have widespread usage in bioengineering applications such as scaffolds due to their biocompatibility, viability, and proliferation properties of these materials. This study introduces a brief overview of the new areas of liquid crystal-based elastomer applications combining both biomaterials and engineering. © 2022 Wiley Periodicals LLC.
  • No Thumbnail Available
    Item
    Design of chemobrionic and biochemobrionic scaffolds for bone tissue engineering
    (Nature Research, 2024) Aslanbay Guler B.; Morçimen Z.G.; Taşdemir Ş.; Demirel Z.; Turunç E.; Şendemir A.; Imamoglu E.
    Chemobrionic systems have attracted great attention in material science for development of novel biomimetic materials. This study aims to design a new bioactive material by integrating biosilica into chemobrionic structure, which will be called biochemobrionic, and to comparatively investigate the use of both chemobrionic and biochemobrionic materials as bone scaffolds. Biosilica, isolated from Amphora sp. diatom, was integrated into chemobrionic structure, and a comprehensive set of analysis was conducted to evaluate their morphological, chemical, mechanical, thermal, and biodegradation properties. Then, the effects of both scaffolds on cell biocompatibility and osteogenic differentiation capacity were assessed. Cells attached to the scaffolds, spread out, and covered the entire surface, indicating the absence of cytotoxicity. Biochemobrionic scaffold exhibited a higher level of mineralization and bone formation than the chemobrionic structure due to the osteogenic activity of biosilica. These results present a comprehensive and pioneering understanding of the potential of (bio)chemobrionics for bone regeneration. © The Author(s) 2024.