Optimal Use of Calcined Boron Waste as a Flux in the Production of Low-Temperature-Sintered Floor Tiles

Simple item page
dc.contributor.authorCengizler, H
dc.contributor.authorKoç, M
dc.date.accessioned2024-07-18T11:48:58Z
dc.date.available2024-07-18T11:48:58Z
dc.description.abstractAbstarct-This study focused on the recycling and optimal use of colemanite waste (CW) in floor tile/tiles (FT) production. Experimental compositions were prepared with various concentrations of CW calcined at 800 degrees C and FT body. The sinterability at low temperatures (1000-1100 degrees C) and the effect of calcined CW on FT properties were investigated. The physical-mechanical properties of the tiles were characterized by linear shrinkage, water absorption and bending strength tests. The microstructure and the phase development of the tiles were determined by SEM-EDX and XRD, respectively. The optimal tile compositions in conformity with the related standards were obtained at 1050 degrees C (30 wt % CW) and 1100 degrees C (5 and 10 wt % CW). The tiles produced with high ratio CW (30 wt %-1050 degrees C) additions had 0.32% water absorption, 5.70% linear shrinkage, and 52.43 MPa bending strength values. The CW calcined at 800 degrees C was favourably used in FT production to lower the sintering temperature with a new possibility to recycle this waste and conserve natural resources.
dc.identifier.issn1087-6596
dc.identifier.other1608-313X
dc.identifier.urihttp://akademikarsiv.cbu.edu.tr:4000/handle/123456789/3665
dc.language.isoEnglish
dc.publisherPLEIADES PUBLISHING INC
dc.subjectCERAMICS
dc.subjectBEHAVIOR
dc.subjectBODY
dc.titleOptimal Use of Calcined Boron Waste as a Flux in the Production of Low-Temperature-Sintered Floor Tiles
dc.typeArticle

Files

Collections

Web of Science Koleksiyonu