Microstructural properties and tribological behaviours of Ultra-High frequency induction rapid sintered Al-WC composites

Simple item page
dc.contributor.authorÇavdar, U
dc.contributor.authorGezici, LU
dc.contributor.authorGül, B
dc.contributor.authorAyvaz, M
dc.date.accessioned2024-07-18T11:54:09Z
dc.date.available2024-07-18T11:54:09Z
dc.description.abstractIn this study, sinterability of 1, 3, 5, 9 and 15 wt.% WC reinforced aluminum matrix composite samples by induction fast and conventional sintering methods was investigated. For this purpose, firstly, it was pressed by unaxial cold pressing method under 200 MPa pressure. Some of these raw samples were sintered by ultra-high frequency induction fast sintering method at 600 degrees C temperature for 300 sec., while the other part of the samples were sintered by 600 degrees C for 1800 sec. The density and hardness values of sintered composite samples were measured and microstructural properties, abrasion and friction behaviours were investigated. In this study, it was seen that increased WC reinforcement ratio and abrasion resistance and friction coefficient increased together. In addition, this study showed that ultra-high frequency sintering is as successful as traditional method in Al-WC composite production.
dc.identifier.issn0034-8570
dc.identifier.other1988-4222
dc.identifier.urihttp://akademikarsiv.cbu.edu.tr:4000/handle/123456789/6159
dc.language.isoEnglish
dc.publisherCONSEJO SUPERIOR INVESTIGACIONES CIENTIFICAS-CSIC
dc.subjectMETAL-MATRIX COMPOSITES
dc.subjectSLIDING WEAR CHARACTERISTICS
dc.subjectALUMINUM-MATRIX
dc.subjectMECHANICAL-PROPERTIES
dc.subjectCREEP-FATIGUE
dc.subjectPARTICLES
dc.subjectCOATINGS
dc.subjectALLOY
dc.subjectSIZE
dc.subjectAL4C3
dc.titleMicrostructural properties and tribological behaviours of Ultra-High frequency induction rapid sintered Al-WC composites
dc.typeArticle

Files

Collections

Web of Science Koleksiyonu