Characterization of a Duplex Coating (Boriding + Hydroxyapatite) on Austenitic Steel

Simple item page
dc.contributor.authorAli Ihsan Bahcepinar
dc.contributor.authorSafiye Ipek Ayvaz
dc.contributor.authorIbrahim Aydin
dc.date.accessioned2025-04-10T11:03:03Z
dc.date.available2025-04-10T11:03:03Z
dc.date.issued2023
dc.description.abstractAbstract: In this study, duplex coating process (Boriding + Hydroxyapatite) was applied to 316L stainless steel alloys. Before coating, the substrate materials were shotblasted with 300–500 µm glass beads in a vacuum type shot blast machine. Tribological properties of the alloy with boriding process, its bioactivity and biocompatibility was increased with the hydroxyapatite (HA) coating process. Powder pack boriding technique was used in boriding process and Electrophoretic deposition method (EPD) was used in HA coating process. At the end of the study, the microstructures (SEM), elemental analyzes of the coating surfaces (EDS), Ca/P ratios, coating thicknesses were determined. In addition, the hardness and adhesion qualities of the boride layer were determined. When the results obtained are evaluated, duplex layers were successfully formed for all parameters. © Pleiades Publishing, Ltd. 2023. ISSN 0031-918X, Physics of Metals and Metallography, 2023, Vol. 124, No. 14, pp. 1837–1844. Pleiades Publishing, Ltd., 2023. ISSN 0031-918X, Physics of Metals and Metallography, 2023. Pleiades Publishing, Ltd., 2023.
dc.identifier.DOI-ID10.1134/S0031918X22100271
dc.identifier.urihttp://hdl.handle.net/20.500.14701/44480
dc.publisherPleiades Publishing
dc.titleCharacterization of a Duplex Coating (Boriding + Hydroxyapatite) on Austenitic Steel
dc.typeArticle

Files

Collections

Scopus Koleksiyonu