Improving the abrasion resistance of AISI 304L metallic biomaterial by microwave boriding

Simple item page
dc.contributor.authorArslan, D
dc.contributor.authorUzun, RO
dc.date.accessioned2024-07-18T11:46:34Z
dc.date.available2024-07-18T11:46:34Z
dc.description.abstractMetallic materials are used as biomaterials thanks to their high mechanical properties. However, their low resistance to corrosion and abrasion reduces the biocompatibility of them. In this study, the abrasion resistance of AISI 304L metallic biomaterial was improved by pack-boriding with microwave hybrid heating. For this purpose, AISI 304L material was pack-borided by using EKABOR II powder for two, four and six hours in a microwave oven with a power of 2.9 kW and a frequency of 2.45 GHz at temperatures of 850 degrees C, 900 degrees C and 950 degrees C. A boride layer with a thickness ranging between 12.1 mu m-56.6 mu m was obtained on the surface as a result of boriding. The specific wear rate of the AISI 304L material pack-borided for four hours at 950 degrees C, which exhibits the highest wear resistance, has been determined as 1.04656 x 10(-5) mm(3)/Nm. The abrasion resistance of AISI 304L metallic biomaterial was increased 28 times by microwave boriding.
dc.identifier.issn1749-785X
dc.identifier.other1749-7868
dc.identifier.urihttp://akademikarsiv.cbu.edu.tr:4000/handle/123456789/2838
dc.language.isoEnglish
dc.publisherINDERSCIENCE ENTERPRISES LTD
dc.subjectTI6AL4V ALLOY
dc.subjectWEAR BEHAVIOR
dc.subjectCORROSION
dc.subjectSTEEL
dc.subjectBIOCOMPATIBILITY
dc.subjectMICROSTRUCTURE
dc.subjectBORON
dc.titleImproving the abrasion resistance of AISI 304L metallic biomaterial by microwave boriding
dc.typeArticle

Files

Collections

Web of Science Koleksiyonu